panblast ain water injection venturi nozzle

panblast ain water injection venturi nozzleThe PanBlast AIN is a water induction blast nozzle for wet blasting and slurry blasting with minimal dust development. Unlike a separate water mist attachment, such as the PanBlast WB1, the AIN is a complete blast nozzle with the water feed and venturi air injection integrated into the nozzle itself. The AIN features an adjustable water feed and adjustable air injection ports. This allows the ratio between water and air to be adapted to the

7 mm) Tungsten Carbide

inlet 1½" 2” 2x1½” Thread connection

and 10 x WEL for particulates

The nozzle is 120 mm in length and is made with a tungsten carbide core and an aluminium jacket

2 / 6 2 / 6 2 / 6 Consumption of compressed air with min/max pressure of air motor (m³/min)

The 62 Series is made to be used in blast guns and equipment using the 5/8" insert format where aggressive abrasives are the primary media

Boron carbide liner: typically 5–10 times longer service life than tungsten carbide with aggressive abrasives

TPR (thermoplastic rubber) and Kevlar®

This is the latest development by Contracor for high performance Venturi blast cleaning nozzles

- Spring Loaded Safety Lock-Out Button

IP56 weather-resistant microswitch

40 mm can be used with the Educt-O-Matic