3/4 Inch Drive x 1-1/2 Inch Shallow 6-Point Impact Socket

3/4 Inch Drive x 1-1/2 Inch Shallow 6-Point Impact SocketTwo Size Markings The size is marked in two ways on every socketboth as a high visibility laser marking and a permanent stamped marking Full Length Socket Well While the overall socket is shallow length, the interior well extends fully into the socket, which allows for better fastener engagement in more situations Drive Tool Retention Sockets work with through hole, friction ring, and detent pin anvils Prevents Fastener Round Off Radiused corners

Part Number DWC12MM-2FDE

Internal Diameter: M8-1

Part Number DWDTS3/8-2MT

permanent connection that can't loosen over time

Part Number DWTB1-1/2-12

• Two Size Markings – The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking • Full-Length Socket Well – Not only is the socket a deep length

Size m10 x 0

resulting in a higher performing tool than one-piece designs • Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types

Part Number: BIT-DEWSFC1-1/4-100

and pulling

and semi-flush diagonal cutters (14-38 AWG)

They are calibrated to be accurate within ±3% for both clockwise and counterclockwise directions and certified to the ISO standard for the full listed range (20 - 200 in-lb)