Small Turn Signal Unit

Small Turn Signal UnitA member requested a small turn signal switch unit that is less obvious. Like it's big brother (MP 104 63), it allows the side lamps yo be used as both side lamps and turn signals without modification to the lamps (i. e. the single filament bulb and socket can be utilized as it is). The switch itself is a very small 1 4" bushing mount toggle switch with three positions, left, center (off) and right. A small 'black box' is provided that contains the

but have been machined from high strength aluminum and are quite a bit more durable than the originals

From the original design by Andy Wood

The SGA has reproduced both in a high strength metal alloy that does not exhibit this problem

very much like a conventional map based device – without the map

Also note they are directional and must be installed in the correct orientation

SGA-16 for large

MP-104-123

This solves the problem and is much more convenient anyway

but if you have a Ghost that is prone to intake manifold fires and overheating when on the overrun going down hill

a reset switch

It tells you distance with two separate and independent odometers and your speed

120 volt 60 cycles AC