Oem Length Up-Pipes 11-16 EGR PPE Diesel

Oem Length Up-Pipes 11-16 EGR PPE DieselDiesel engines (even stock) produce high temperatures and pressures. OEM up pipes eventually fail from constant temperature and pressure fluctuation. PPE has taken OEM replacement to a new level. PPE OEM Up Pipes allow 53 percent greater flow than stock. PPE OEM Up Pipes are a direct bolt on to your factory manifolds. But unlike factory parts, PPE OEM Up Pipes are manufactured from 11 gauge 304 stainless steel and include our superior PPE 304

0 Hotside Intercooler Pipe - Raw Finish

The screen sits below the oil cooler in the valley of the motor to filter out the oil particulates before the oil goes into the oil cooler

allowing the clutch packs to clamp quickly and completely

The damage and distortion that typically happens with plastic bleeder screws from the high under-hood temperatures and routine use will no longer be a problem

PPE High-Performance Up-Pipe Gaskets are made to handle extreme changes in temperature

Notice: PPE Stage3 Tie Rods are engineered to fit GM stock steering components

Injectors are primarily intended for off-road use and are big enough to be ran with a 13mm P-pump

Properly installed

Polished Stainless Steel

This socket takes a standard 1/2-inch drive or a 1 1/4-inch (32mm) socket

30-1/2 Inch over-all-length M18 - 1

No cheap knock-offs